Description

Grafis Overview

Bases – unlimited number of base options: skirts, trousers, men’s and women’s shoulder bases, knitted bases, children’s, underwear bases, denim products, workwear bases and hats.

Grafis Features

Gradation – automatically multiplied basic designs
Automatic seam allowances and corners
Automatic gradation by dimensional features, which is more accurate compared to traditional gradation by increments,
Possibility to intervene in automatic gradation, changing it according to your requirements,
Gradation of patterns by increments.
Manual or automatic layout
Output of patterns to a plotter or to a PLO, PDF file

Instructions for the auto layout

The procedure for installing the emulator for Windows XP X32:
———————————————————–
You must first install the original Sentinel drivers…
Then unzip the archive with the emulator into a separate folder…
To install the emulator, you must run the file ‘install.bat’.
During the installation of the emulator, the computer will find new hardware (USB key) and install the driver.
If Windows displays a message about an attempt to install an unsigned driver, you should allow the installation.
After the message that the device is installed, the program will work without a key.
To remove the emulator from the computer, you must run the file ‘remove.bat’.

The procedure for installing the emulator for Windows 7 X32 and higher:
———————————————————–
After you have installed the driver for the Sentinel protection key…
Use the DSEO.exe program to switch Windows 7 to test mode…
Then reboot the computer…
To remove the message in the lower right corner of the screen that Windows is in test mode, run RemoveWatermarkX86.exe
Then run the ‘install.bat’ file.
During the installation of the emulator, the computer will find new equipment (USB key) and install the driver.
After the message that the device is installed, the program will work without a key.
To remove the emulator from the computer, you need to run the ‘remove.bat’ file

The procedure for installing the emulator for Windows 7 X64:
———————————————————–
After you have installed the driver for the Sentinel X64 protection key…
Using the DSEO.exe program, put Windows 7 X64 into test mode…
you need to select the “Enable Test Mode” checkpoint and click “Next”…
Then reboot the computer by pressing the F8 button
(at the beginning of Windows loading, select the item “Disable mandatory driver signature verification”).
Then in the mode of disabled signatures, install the emulator, you need to run the install.bat file.
Then run DSEO.exe again and select the item “Sign a System File”
In the window, enter C:\WINDOWS\system32\drivers\MultiKey.sys and click OK.
After the message that the file is signed, reboot the computer…
During the boot process, the computer will find new equipment (USB key) and install the driver.
After the message that the device is installed, the program will work without a key.
To remove the message in the lower right corner of the screen that Windows is in test mode, run RemoveWatermarkX64.exe and reboot.
To remove the emulator from your computer, you need to run the file ‘remove.bat’

File Information

Year/Release Date : 2011
Version : 11.00 Build 437250
Developer : GRAFIS Software
Developer’s website : www.grafis.com
Bit depth : 32bit
Interface language : Multilingual
Tablet : present