Autodesk Inventor Pro

Autodesk Inventor Pro Overview

Autodesk Inventor Pro is a comprehensive set of solutions for mechanical engineering 3D design and documentation, development of cable and pipeline systems, design of injection molds and testing of the performance characteristics of developed products. With Autodesk Inventor Pro, engineers can integrate AutoCAD drawings and other 2D data into a single model, creating a virtual representation of the final product. Verification of form, tolerances and functionality is carried out using the program long before the product is put into production.

Autodesk Inventor Pro provides a complete set of flexible tools for 3D mechanical design, product analysis, tooling, custom design, and design data sharing. Autodesk Inventor Pro helps you go beyond 3D with digital prototyping technology, based on a highly accurate 3D model that allows you to design, visualize and analyze products before the first sample is produced. Autodesk Inventor Pro digital prototyping technology enables you to improve product quality, reduce development costs, and speed time to market.

Autodesk Inventor Pro includes easy-to-use, highly interoperable dynamic analysis and stress analysis tools that help you understand the behavior of parts and products in real-world conditions and bring high-quality products to market faster. Autodesk Inventor Pro automates key aspects of the plastic injection mold design process, as well as the routing of complex piping and cable networks. Thanks to these capabilities, the risk of errors is reduced and the competitiveness of manufactured products increases.

Autodesk Inventor Pro Features

– Design Intent
With the new Finish element, presentation data and properties can be included in the description of industrial production steps to document actual processes. For example, specify coating materials, heat treatments, surface textures, and paints that can be applied on top of each other and may or may not be suppressed by model states.

– Professional-grade features
Accelerate the creation of hole and punch patterns, custom or reverse-cut elbows (angle not limited to 45 or 90 degrees) in tube and pipe environments, support for custom image-based lighting (IBL) environments to emulate realistic renderings.

– Complies with 2D and 3D drawing rules
Annotate weld symbols in 3D parts and assemblies (without converting to weldment), apply sheet or view-based revision clouds in drawings, use the new ISO 13715 edge symbol annotation.

– Customer Requested Enhancements
Rotate cut planes, get the minimum bounding box orientation for a part (using the Derived Component command) or for an assembly (using the Derived Component or Simplify command), iLogic, and support for “For Only” mode. Reading” via Vault Professional.

FAQ

Question: What is the program medicine?
Answer: The medicine included in the assembly is based on a hacked Network Licensing Mechanism (NLM) from the MAGNiTUDE hack group. Well, the author of the assembly wrapped it all in a convenient shell that allows you to apply the medicine in one click, and slightly supplemented it with his own “bells and whistles”.

Question: What is the compatibility of the medicine used in the assembly with other Autodesk programs?
Answer: As for the 2025 line, the medicine is compatible with most popular Autodesk programs that had already been released at the time the assembly was released. As for compatibility with lower-line programs, such compatibility is also available. Installing this program will kill the activation of products from the 2020-2024 lines. But this activator will heal them again! The only thing is, if your 2020-2021 products were activated with a keygen, the activation format will change to network. Activation of products from 2019 and below lines will not be affected in any way.

Question: I need the Autodesk Access module to communicate with Autodesk servers. How to install it?
Answer: From the distribution, run ..x64AccessAdAccess-installer.exe. Once the installation is complete, restart your computer and everything will work. I would especially like to draw your attention to the fact that the installation must be done after using the medicine, since it forcibly “jams” Autodesk Access!

Question: The program is not installed. A message appears about preparation for installation, which closes after a couple of seconds and the installation stops. What’s wrong?
Answer: There is a problem with the compatibility of different versions of the installer. Follow the instructions from the Autodesk website. Don’t think that it is for solving another problem – the method will work in this case too.

Question: The program is not installed. A 400x series error message appears. What to do?
Answer: First, read the explanation of error codes and brief recommendations for solving problems with installing Autodesk products. If this does not help, then you can only find out the causes of the problem yourself by reading the installation logs. Autodesk has a utility that intelligently collects the necessary logs scattered across different folders of the operating system.

Installation

1. Install Autodesk Inventor Pro 2025 ( Setup.exe file ).
2. Run the AdskNLM.exe file from the Crack folder and wait until the message “Cracking complete. Enjoy!” appears.
3. Launch the installed application. In the license type selection window, click “Use a network license.”
4. Enjoy the registered version of the product!

File Information

Year of release: 2024
Program version: 2025.0.1 build 162
Developer: Autodesk
Platform: Windows x64
Interface language: English / Russian
Medicine: Present

System Requirements

• 64-bit version of Windows 10 or Windows 11, corresponding to the product support lifecycle policy Autodesk
• 2.5 GHz processor (3 GHz, 4 cores or more recommended)
• 16 GB RAM for assemblies with less than 500 parts (32 GB recommended)
• Video card with 2 GB VRAM, 29 Gbps bandwidth and DirectX 11 support (8 GB and 106 Gbps recommended)
• 1280×1024 screen resolution (3840×2160 recommended; preferred scaling 100%, 125%, 150% or 200% )
• 40 GB available disk space
• Google Chrome or equivalent
• .NET Framework 4.8 or later

Complex models, complex mold assemblies, and large assemblies (1000+ parts)
• 3.3 GHz processor, minimum 4 cores
• 64 GB RAM
• 8 GB VRAM, 106 Gbps video card / with support for DirectX 11